Ever since USBs have become pretty much a necessity for everyone who owns a computer these days, many people have been wanting to spruce up their thumb drives. Now there are actually stores or people who would create custom made usb drives for these type of people. Now with a few materials at home and some effort, it is actually possible to save a lot of money and create custom thumb drives right at home.
Now the first step in doing this would be to get a thumb drive and take out the existing case. It is important to get the internals because this is what will be used to make the custom made drive. One has to be very careful though because the internal part of the drive is quite sensitive.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
The last step in the process is to use some epoxy or super glue to stick the thumb drive to the hole. To do this step, one has to just slot the drive inside the hole then put the glue all over the entrance of the hole. After that, he should let the glue dry by putting the newly made thumb drive across an electric fan so that the glue will dry.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
Now the first step in doing this would be to get a thumb drive and take out the existing case. It is important to get the internals because this is what will be used to make the custom made drive. One has to be very careful though because the internal part of the drive is quite sensitive.
A suggested thing to do would be to use a screwdriver instead of bare hands to split open the case. Now do take note that there are no screws on thumb drives but it will be help to snap open the covering. With a screwdriver, it will also be less likely that one will damage the internal part because he will not need to use too much force.
The next step in this process would be to find an outer covering for the thumb drive. Now this is the rather interesting part because this is where one can get creative. This outer covering can be made from practically any material ranging from plastic to metal or anything else.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
The last step in the process is to use some epoxy or super glue to stick the thumb drive to the hole. To do this step, one has to just slot the drive inside the hole then put the glue all over the entrance of the hole. After that, he should let the glue dry by putting the newly made thumb drive across an electric fan so that the glue will dry.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
Out Of Topic Show Konversi KodeHide Konversi Kode Show EmoticonHide Emoticon